Belmash CBS – household circular bench saw. Designed to cut timber (solid or glued, plywood, chipboard, fiberboard) with manualfeeding.
The machine has belt drive to provide for increased cutting height with theuse of smaller saw blade. The above leads to increased torque and materialfeeding speed. The structure of saw blade’s tilting and lifting allows preciseand smooth adjustment of the required angle and height.
To cut big workpieces, one can make use of extended table and side tables. If using the side table the, ruler length can be increased.
The guiding ruler is made for universal use. It can be used both for lengthwiseand angular cross cutting. The ruler is completed with sliding bearingfor smoother and simpler cutting.
For easier transportation the machine is equipped with handles and wheels.
The switch is located on rotating bracket.
Operation conditions – outside, under the shelter, indoors except for residential premises.
Additional accessories for BELMASH CBS-2000 machine such as: side table CBS-ST-01.
|Range of cutting depth by saw blade, (90 degrees), mm||0÷88|
|Range of cutting depth by saw blade (45 degrees), mm||0÷63|
|Tilting angle of saw blade, degree||0÷45|
|Rated idle RPM, min-1||2850|
|Rated consumed power, W||2000|
|Rated voltage, V||230|
|Rated frequency, Hz||50|
|Diameter of saw blade, mm||250|
|Diameter of mounting bore of saw blade , mm||32|
|Working table size (L×B), mm||800×550|
|Extended table size (L×B), mm||650×400|
|Working table height, mm||835|
|Overall dimensions, L×B×H, with extended table, mm||1505×580×978|
|Weight of machine including devices (net), kg||63|
|Circular bench saw||1|
|Fencing of saw blade and disc cutter together with the splitting knife||1|
|Handle (thumb screw)||3|
|Device for angular cross cutting||1|
|Knife’s block fencing||1|
|Insert for milling||1|
|Drilling chuck 13-М12×1,25||1|
|Cover for swarf removal*||1|
|Guardrail an end mill||1|
|Personal protective equipment||1|
*part can be installed on the machine
By mutual agreement with buyers the completeness of the machine may be changed.