The clamping device is attached to the machine with four screws. Used only on the machine BELMASH SDM-2200.
Pre-position on the scale of the pressing device thickness of the workpiece, which would like to receive as a result of treatment. Setting the desired thickness of the workpiece by turning the handwheel in the direction of arrows "plus" or "minus", available at the flywheel to align the indicator with the appropriate value on the scale.
Upon rotation of the flywheel in the direction of arrow "plus" value is a desired workpiece thickness increases, but in the direction "minus" decreases.
Workpiece must always apply under the probes measuring plate. The number of passes depends on the set workpiece cutting depth.
|Width of a workpiece, mm||15÷250|
|Range of cutting depth per pass, mm||0÷3|
|Thickness of a workpiece, mm||8÷63|
|Overall dimensions, L×W×H, mm||293×324×113|
|Overall dimensions of the packaging box, L×W×H, mm||299×66×259|
|Quantity of devices in transport packaging box , pcs.||8|
|Weight of 1 device (net/gross),kg||3,2/3,4|
|Spring washer 5||4|
|Spring washer 8||2|